Bresser T-Rex Instruction Manual page 57

Wi-Fi Connection
Perform the following steps to connect your PC to the printer using a Wi-Fi®
connection. Note that printing from an SD™ card is disabled when Wi-Fi is
enabled.
1. Power on the printer and your computer.
2. On the printer, select Tool > Setting > WIFI > WIFI ON.
3. Open your computer's wireless network settings and scan for available Wi-i®
signals.
4. Open your internet browser. Type 10.10.100.254 and press the Enter key on
your keyboard.
5. Enter the username and password to login. The default username and
password are both admin. The control panel will appear after successful
login.
6. Click the WiFi Set tab on the left, then set the WiFi Work Mode to AP mode or
STA mode, then click Restart to make the changes take effect.
www.bresser.de
57