Bresser T-Rex Instruction Manual page 55

 Limit Switch: Displays the status of the limit switches on each
axis. If the extruder or build plate are not moved to its maximum
positions, the status will show
Not Triggered in green. If the extruder or build plate has been
moved to its maximum position, the status will show Triggered
in red.
 Stepper Motor Controls: Click the Enable button to lock the
stepper motor so that it does
 not allow movement. Click Disable to unlock the stepper motor
so the extruder and build plate can be manually moved.
 LED Color: Allows you to set the LED color of the printer.
 Motor Speed (RPM): Controls the speed of the filament feed
wheel.
 Forward: Feeds filament to the extruder.
 Reverse: Unloads filament from the extruder.
 Stop: Stops motor movement when feeding or unloading
filament.
 Temperature Control: Allows you to set the target extruder or
platform temperature. Click the Apply button to start heating.
Update Firmware:
On Board Preferences: Allows you to check the printer's name.
Machine Information:
6.2.9 Help Menu
The Help Menu contains the following options.
First Run Wizard:
Help Contents:
Feedback:
Check For Updates: Checks for REXprint updates.
About REXprint:
www.bresser.de
Allows you to update the printer's firmware.
Displays information about the printer, including the
firmware version.
Re-runs the wizard that automatically runs the first time
REXprint is run.
Allows you to read the help files.
Allows you to submit feedback.
Displays REXprint version information.
55