③ Touch the Filament button, then touch the Load Left button.
④ Wait for the extruder to heat up to the target temperature. The extruder will
alert you when it is at the target temperature.
Congratulations, you have successfully loaded filament into your printer!
www.bresser.de
⑤ Load the filament by inserting
it into the extruder at an
upright angle. Filament will
start to extrude out of the
nozzle. Continue loading to
ensure that the filament is
extruding in a straight line.
Refer to the troubleshooting
section if the filament is
extruding abnormally.
Touch the Done button to finish
loading.
30