Table of Contents
Advertisement
Quit:
Click File > Quit or press ALT+F4 to exit REXprint. If there are
any unsaved changes to your project or model, you will be
prompted to save the changes.
6.2.6 Edit Menu
The Edit Menu contains the following options.
Undo:
Redo:
Empty Undo Stack: Click Edit > Empty Undo Stack to clear the software's
Select All:
Auto Layout All:
Mirror Model:
www.bresser.de
Auto layout newly-imported model: Determines whether
the software will automatically adjust the position of a model
immediately after it is loaded.
Printing Window Type: Allows you to choose the Basic
(default) print dialogue or the Expert dialogue, with many
more individual settings.
Click Edit > Undo or press CTRL+Z to undo the last change.
In most cases, you can undo multiple changes, one at a
time.
Click Edit > Redo or press CTRL+Y to redo the last change
that was undone. In most cases, you can redo multiple
undos.
memory of recent undos. This has the same effect as
saving and reloading the project or model file.
Click Edit > Select All or press CTRL+A to select all models
in the scene. Duplicate: Click Edit > Duplicate or press
CTRL+V to copy the selected model(s). Delete: Click Edit >
Delete or press the Del key to delete the selected
model(s).
Click Edit > Auto Layout All to automatically arrange the
model(s) on the build platform. You will be prompted to set
the distance between models, which can be from 1.0 to
50.0 mm.
Click Edit > Mirror Model to mirror the selected model(s)
in the X, Y, or Z planes.
52
Advertisement
Table of Contents
