Bresser T-Rex Instruction Manual page 22

④ Take the dual extruder out and
affix the extruder carefully
because the extruder cable is
short.
⑦ Remove lid.
www.bresser.de
⑤ Remove the foam container. It
should contain: power cable, USB
cable, two spool holders, SD card,
tool bag, extruder's accressory kit,
one 1kg red pla filament.
⑥ Snip beltings on both sides of X-axis
guide rod.
⑧ Remove side protective foam
sheets from inside the printer.
22