Safety Instructions; Safety In The Working Environment - Bresser RAPTOR Instruction Manual

NOTE!
Familiarize yourself with this manual and read all the instructions it contains before
you start setting up and operating the machine. Failure to heed warnings and
instructions may result in personal injury, fire, and damage to the machine or other
property.
STRICTLY FOLLOW ALL SAFETY AND OTHER INSTRUCTIONS IN THIS
MANUAL AT ALL TIMES!

Safety in the working environment

① Keep the workplace clean!
② Do not operate the 3D Printer if flammable liquids, gases or dust are present.
③ Keep children and untrained persons away from the 3D printer.
① Operate the 3D Printer only from a grounded power outlet. Do not modify the
Power supply safety
② Do not operate the 3D Printer in a hazy or humid environment. Do not expose
power plug of the 3D Printer.
③ Do not use the power cord for any purpose other than its intended use.
the 3D printer to direct sunlight.
④ Do not operate the machine during a thunderstorm.
⑤ To prevent accidents, disconnect the power supply if you are not going to use
the machine for a long period of time.
① Do not touch the nozzle or printing plate during printing.
Safety of persons
② Do not touch the nozzle after printing is finished.
③ Wear suitable clothing. Do not wear loose clothing or loose-fitting jewellery. Be
④ Do not operate the machine if you are tired or under the influence of drugs,
careful not to let your hair, clothing and gloves get near the moving parts.
alcohol or medication.
www.bresser.de

Safety Instructions

5