Cannot insert a memory card.
Insertion direction of the memory card is wrong. Insert it in the correct direction (
"Read This First").
Cannot record on a memory card.
The memory card is full. Delete unnecessary images (page 114,
An unusable memory card is inserted (
You are using the memory card with the write-protect switch, and the switch is set to the
LOCK position. Set the switch to the recording position.
The Microdrive is heated.
You are using the Microdrive for a long time. This is not a malfunction.
You have formatted a memory card by mistake.
All the data on the memory card is deleted by formatting. You cannot restore it.
"Memory Stick PRO Duo" is not recognized by a computer with a "Memory
If "Memory Stick PRO Duo" is not supported, connect the camera to the computer
(page 129). The computer recognizes the "Memory Stick PRO Duo".
The supplied Remote Commander does not function.
To shoot, set the drive mode to
to a TV.
Insert a battery into the battery holder with the +/– polarities correctly matching the +/–
Remove any obstructions between the Remote Commander and the remote sensor.
Point the remote sensor away from strong light sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander may not function properly.
A lens or hood may cover the remote sensor to protect it from the light. Operate the Remote
Commander from postitions where the light from the Remote Commander is not obscured.
Another DVD device malfunctions when you use the supplied Remote
Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of
your DVD device with black paper.
step 3 in "Read This First").
step 6 in "Read This
]. To play back, connect the camera
step 3 in