You can use continuous shooting, self-timer, bracket, and shooting using the Remote
Commander, with the DRIVE button.
Press DRIVE to display the drive mode screen.
Select the desired mode with v/V on the multi-selector, then select the
desired setting with b/B on the multi-selector.
Select the mode
Press the center of the multi-selector to turn off the screen.
• You can substitute the Fn (Function) button for the DRIVE button (page 30).
• Also used for canceling other drive modes.
Continuous adv. (page 56)
Self-timer (page 57)
Bracket: Cont. (page 57)
Bracket: Single (page 58)
WB bracket (page 59)
DRO adv. bracket (page 59)
Remote Commander (page 60)
Select the setting
: The default setting)