The image is blurred.
The picture was taken in a dark location without the flash, resulting in camera-shake. The use
of the Super SteadyShot function or a tripod is recommended. The flash can be used in this
The picture of the subject was taken at a very short distance, such as in macro shooting. The
Super SteadyShot function may not be fully effective when the subject is very near. In such a
case, turn off the Super SteadyShot function and consider using a tripod (
The subject was moving quickly. Select a higher shutter speed or a higher ISO sensitivity (the
higher the ISO sensitivity, the noisier the image).
The EV scale b B is flashing in the viewfinder.
The subject is too bright or too dark for the metering range of the camera.
Refer to "Computers" (page 153) in conjunction with the following items.
Your camera cannot play back images.
The folder/file name has been changed on your computer (page 134).
When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection (page 132).
The image does not appear on the TV screen.
Check [Video output] to see if the video output signal of your camera is set to the color
system of your TV (page 121).
Check whether the connection is correct (page 89).
If a USB cable is connected to the camera, disconnect the USB cable (page 132).
Your camera cannot delete an image.
Cancel the protection (page 115).
You have deleted an image by mistake.
Once you have deleted an image, you cannot restore it. We recommend that you protect
images (page 115).
You cannot mark a DPOF mark.
You cannot mark DPOF marks on RAW data files.
step 5 in "Read This First").
step 5 in "Read