Download  Print this page

Dpof Setup - Sony DSLR-A700H User’s Guide User's And Troubleshooting Manual

Digital single lens reflex camera.
Hide thumbs

Advertisement

To protect all the images
1 Select [All images] in [Protect].
The message "Protect images?" appears.
2 Select [OK] with v on the multi-selector, then press the center of the multi-selector.
The image is protected, and the screen returns to the playback screen.
To cancel the protection
1 Select [Cancel all] in [Protect].
The message "Cancel all?" appears.
2 Select [OK] with v on the multi-selector, then press the center of the multi-selector.
The image protection is canceled, and the screen returns to the playback screen.

DPOF setup

Using the camera, you can specify the images and the number of images to print before you
print images at a shop or with your printer.
Marked images
All images
Cancel all
• You cannot mark RAW data files.
• You can specify any number up to 9.
To specify DPOF on selected images
1 Select [Marked images] in [DPOF setup].
2 Select the image you want to mark with b/B on the multi-selector, then select the number of
sheets with the rear control dial.
A DPOF mark appears on the selected image, and the number of sheets is selected.
• To cancel a selection, rotate the rear control dial to remove the DPOF mark.
3 To specify DPOF on other images, repeat step 2.
• To cancel, press
4 Press MENU.
The message "Set DPOF?" appears.
5 Select [OK] with v, then press the center of the multi-selector.
The DPOF is specified on the selected images, and the screen returns to the playback screen.
116
Follow the procedure below.
Specifies DPOF only on the selected images.
Specifies DPOF on all the images in the memory card.
Unspecifies DPOF on all the images in the memory card.
DPOF
Total number
(Playback).
For details on the operation
1
page 32

Advertisement

Table of Contents

   Also See for Sony DSLR-A700H User’s Guide

   Related Manuals for Sony DSLR-A700H User’s Guide

Comments to this Manuals

Symbols: 0
Latest comments: