Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
•
the printer provides these functions or not.
The date may not be superimposed in the index mode depending on the printer. Consult the
•
printer manufacturer.
"---- -- --" is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date
•
imprint] to [Off] and print the image again (page 148).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
Cannot print the image at the size selected.
Disconnect the USB cable and reconnect it whenever you change the paper size after the
•
printer has been connected to the camera.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 147) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
Others
The lens gets fogged.
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
•
using it (page 168).
The message "Set date and time?" appears when you turn on the camera.
The camera has been left unused for sometime with a low battery or no battery pack. Charge
•
the battery pack and set the date again (
lost every time the battery pack is charged, consult your Sony dealer or local authorized Sony
service facility.
The number of recordable images does not decrease or decreases two at a
time.
This is because the compression rate and the image size after compression change depending
•
on the image when you shoot with a JPEG image (page 96).
156
step 4 in "Read This First"). If the date setting is
t