Avaya AP-4 User Manual page 98

Network
You can configure and view the following parameters within the DHCP
Server Configuration screen:
Parameter
Note: You cannot enable the DHCP Server functionality unless
there is at least one IP Pool Table Entry configured.
Enable DHCP Server:
Subnet Mask:
Gateway IP Address:
Primary DNS IP
Address:
Secondary DNS IP
Address:
Number of IP Pool
Table Entries:
4-14
Description
Place a check mark in the box provided
to enable DHCP Server functionality.
This field is read-only and reports the
Access Point's current subnet mask.
DHCP clients that receive dynamic
addresses from the AP will be assigned
this same subnet mask.
The AP will assign the specified address
to its DHCP clients.
The AP will assign the specified address
to its DHCP clients.
The AP will assign the specified address
to its DHCP clients.
This is a read-only field that reports the
number of IP address pools currently
configured.
Avaya Wireless AP-4/AP-5 User's Guide