•
Click OK twice to save your changes and return to Internet
Explorer.
3. Enter the Access Point's IP address in the browser's Address field
and press Enter.
•
This is either the dynamic IP address assigned by a network
DHCP server or the static IP address you manually configured.
See
ScanTool
address and manually configure a new IP address, if necessary.
•
Result: The Enter Network Password screen appears.
•
Enter the HTTP password in the Password field. Leave the
User Name field blank. For new units, the default HTTP
password is "public".
Figure 2-10:Enter Network Password
•
Result: The Setup Wizard will launch automatically.
Avaya Wireless AP-4/AP-5 User's Guide
for information on how to determine the unit's IP
Initialization
2-21