Avaya AP-4 User Manual page 297

Figure A-12: Result of "show system" CLI command
Set Static IP Address for the AP
Note: The IP Subnet Mask of the AP must match your network's Subnet
Mask.
[Device Name]>set ipaddrtype static
[Device Name]>set ipaddr <fixed IP address of unit>
[Device Name]>set ipsubmask <IP Mask (default = 255.0.0.0)>
[Device Name]>set ipgw <gateway IP address (default =
[Device Name]>show network
Change Passwords
[Device Name]>passwd <Old Password> <New Password> <Confirm
[Device Name]>set httppasswd <New Password> (HTTP interface
Avaya Wireless AP-4/AP-5 User's Guide
Set Basic Configuration Parameters using CLI Commands
Password> (CLI password)
169.254.128.133)>
A-39