Avaya AP-4 User Manual page 65

Setting
WEP Encryption:
Set Encryption Key 1:
Avaya Wireless AP-4/AP-5 User's Guide
AP-5 AP-4 Description
Place a check mark in the box provided to
X X
enable WEP encryption. See
Encryption
If you enabled Encryption, configure an
X X
Encryption Key. This key is used to encrypt
and decrypt data between the AP-5 and its
wireless clients. Enter the number of
characters that correspond to the desired key
size, as described below:
For AP-5:
For AP-4:
for more information.
– Enter 10 hexadecimal characters (0-9
and A-F) or 5 ASCII characters (see
ASCII Character Chart) to use 64-bit
encryption.
– Enter 26 hexadecimal characters or
13 ASCII characters to use 128-bit
encryption.
– Enter 32 hexadecimal characters or
16 ASCII characters to use 152-bit
encryption.
– Enter 10 hexadecimal characters (0-9
and A-F) or 5 ASCII characters (see
ASCII Character Chart) to use 64-bit
encryption.
– Enter 26 hexadecimal characters (0-9
and A-F) or 13 ASCII characters to
use 128-bit encryption.
Initialization
WEP
2-27