Avaya AP-4 User Manual page 188

RADIUS
2. Place a check mark in the box labeled Enable Primary RADIUS
Authentication Server.
3. If you want to configure a back-up RADIUS server, place a check
mark in the box labeled Enable Back-up RADIUS Authentication
Server.
4. Enter the time, in seconds, each client session may be active before
being automatically re-authenticated in the Authentication
Lifetime field. This parameter supports a value between 900 and
43200 sec; the default is 900 sec.
5. Select a MAC Address Format Type. This should correspond to
the format in which the clients' 12-digit MAC addresses are listed
within the RADIUS server. Available options include:
• Dash delimited: dash between each pair of digits: xx-yy-zz-aa-
bb-cc
• Colon delimited: colon between each pair of digits:
xx:yy:zz:aa:bb:cc
• Single dash delimited: dash between the sixth and seventh
digits: xxyyzz-aabbcc
• No delimiters: No characters or spaces between pairs of
hexadecimal digits: xxyyzzaabbcc
6. Select a Server Addressing Format type (IP Address or Name).
• If you want to identify RADIUS servers by name, you must
configure the AP as a DNS Client. See
7. Enter the server's IP address or name in the field provided.
4-104
DNS Client
Avaya Wireless AP-4/AP-5 User's Guide
for details.