Avaya AP-4 User Manual page 88

Configuring the AP Using the HTTP Interface
Figure 4-2: Configure Main Page
6. Click the tab that corresponds to the parameter you want to
configure. For example, click Network to configure the
Access Point's TCP/IP settings. The parameters contained in each
of the nine configuration categories are described later in this
chapter.
7. Configure the Access Point's parameters as necessary. After
changing a configuration value, click OK to save the change.
8. Reboot the Access Point for all of the changes to take effect.
4-4 Avaya Wireless AP-4/AP-5 User's Guide