Avaya AP-4 User Manual page 319

• Static MAC Address Filter Table
addresses
• Proxy ARP Parameters
wireless clients
• IP ARP Filtering Parameters
sent to wireless clients based on IP settings
• Broadcast Filtering Table
packets forwarded to the wireless network
• TCP/UDP Port Filtering
port
• Alarms Parameters
• SNMP Table Host Table Parameters
addresses that will receive alarms from the AP
• Syslog Parameters
information to network servers
• Bridge Parameters
• Spanning Tree Parameters
• Storm Threshold Parameters
broadcast packets
• Intra BSS Subscriber Blocking
traffic on the same AP
• Packet Forwarding Parameters
clients to a specified MAC address
• Security Parameters
Avaya Wireless AP-4/AP-5 User's Guide
- Enable and disable specific
- Enable or disable proxy ARP for
- Control which ARP messages are
- Control the type of broadcast
- Filter IP packets based on TCP/UDP
- Configure the AP to send Syslog
- Used to help prevent network loops
- Set threshold for number of
- Enable or disable peer to peer
- Redirect traffic from wireless
- Access Point security settings
Parameter Tables
- Enter the list of IP
A-61