Avaya AP-4 User Manual page 57

d. Enter a static IP Address for the AP in the field provided.
You must assign the unit a unique address that is valid on
your IP subnet. Contact your network administrator if you
need assistance selecting an IP address for the unit.
e. Enter your network's Subnet Mask in the field provided.
f. Enter your network's Gateway IP Address in the field
provided.
g. Enter the SNMP Read/Write password in the Read/Write
Password field (for new units, the default SNMP Read/
Write password is "public").
Note: The TFTP Server IP Address and Image File Name fields are only
available if ScanTool detects that the AP does not have a valid
software image installed. See
h. Click OK to save your changes.
• Result: The Access Point will reboot automatically and
any changes you made will take effect.
i. When prompted, click OK a second time to return to the
Scan List dialog.
j. Click Cancel to close the ScanTool.
k. Proceed to
the HTTP interface.
Avaya Wireless AP-4/AP-5 User's Guide
Client Connection
Setup Wizard for information on how to access
Initialization
Problems.
2-19