Avaya AP-4 User Manual page 248
Avaya ap-4 access point: users guide
Hide thumbs
Also See for AP-4:
- User manual (433 pages) ,
- User manual (502 pages) ,
- Configuration and deployment manual (3 pages)
Table of Contents
Advertisement
Recovery Procedures
5. Under File -> Properties -> Settings -> ASCII Setup, enable the
Send line ends with line feeds option.
Result: HyperTerminal sends a line return at the end of each line of
code.
6. Press the RESET button on the AP.
Result: The terminal display shows Power On Self Tests (POST)
activity. After approximately 30 seconds, a message indicates:
Sending Traps to SNMP manager periodically. After this
message appears, press the ENTER key repeatedly until the
following prompt appears:
[Device name]>
7-22
Avaya Wireless AP-4/AP-5 User's Guide
Advertisement
Table of Contents
Troubleshooting
