Recovery Procedures
3. Press the RESET button on the AP (see
Buttons
to identify the location of the RESET button).
Result: The terminal display shows Power On Self Tests (POST)
activity, and then displays a CLI prompt, similar to the example
below. This process may take up to 90 seconds.
[Device name]>
4. Enter the CLI password (default is public).
Result: The terminal displays a welcome message and then the CLI
Prompt:
[Device name]
5. Enter show ip. Result: Network parameters appear:
Figure 7-2: Result of "show ip" CLI Command
7-26
Please enter password:
>
RELOAD and RESET
Avaya Wireless AP-4/AP-5 User's Guide