8. Enter the Shared Secret in the Shared Secret and Confirm Shared
Secret field. This is a password shared by the RADIUS server and
the AP. The same password must also be configured on the
RADIUS server.
9. Enter the maximum time, in seconds, that the AP should wait for the
RADIUS server to respond to a request in the Response Time field.
Range is 1-10 seconds; default is 3 seconds.
10.Enter the maximum number of times an authentication request may
be retransmitted in the Maximum Retransmissions field. Range is
1-4; default is 3.
11.If you are configuring a back-up server, repeat Steps 5 through 10
for the back-up server.
12.Click OK to save your changes.
13.Reboot the AP device for these changes to take effect.
Avaya Wireless AP-4/AP-5 User's Guide
RADIUS
4-111