7. Connect one end of an Ethernet cable to the Access Point's Ethernet
port. The other end of the cable should not be connected to another
device until after the installation is complete.
• Use a straight-through Ethernet cable if you intend to connect the
Access Point to a hub, switch, patch panel, or Active Ethernet power
injector.
• Use a cross-over Ethernet cable if you intend to connect the
Access Point to a single computer.
8. If you are not using Active Ethernet (or you want to connect the
Access Point to Active Ethernet and AC power simultaneously),
attach the AC power cable to the Access Point's power port.
Avaya Wireless AP-4/AP-5 User's Guide
Installation
2-9