Avaya AP-4 User Manual page 49

9. Connect the free end of the Ethernet cable to a hub, switch, patch
panel, Active Ethernet power injector, or an Ethernet port on a
computer.
10. If using AC power, connect the power cord to a power source (such as
a wall outlet) to turn on the unit.
11. Configure and test the unit. See
12. Download the latest software to the unit, if necessary. See
the Latest Software
13. Place the unit in the final installation location. See
for mounting options and instructions.
Note: Avaya recommends that you perform a Site Survey prior to
determine the installation location for your AP units. For
information about how to conduct a Site Survey, contact your local
reseller.
14. Replace the back cover, front cover, and cable cover. Be careful to
avoid pinching the power and Ethernet cables when replacing the
cable cover.
Avaya Wireless AP-4/AP-5 User's Guide
Initialization
for details.
Installation
for details.
Download
Mounting Options
2-11