Avaya AP-4 User Manual page 61

• Navigation Panel: The Setup Wizard provides a navigation
panel on the left-hand side of the page. Click the link that
corresponds to the parameters you want to configure and the
appropriate configuration page appears. Note that clicking a link
in the navigation panel will not submit any changes you made to
the unit's configuration on the current page.
• Exit: The navigation panel also includes an Exit option. Click
this link to close the Setup Wizard at any time.
Note: If you exit from the Setup Wizard, any changes you submitted (by
clicking the Save & Next button) up to that point will be saved to
the unit but will not take effect until the AP is rebooted.
5. Configure the System Configuration settings and click Save & Next.
See System for more information.
6. Configure the Access Point's Basic IP address settings, if necessary,
and click Save & Next. See
information.
7. Assign the AP new passwords to prevent unauthorized access and
click Save & Next. Each management interface has its own
password:
• SNMP Read Password
• SNMP Read-Write Password
• CLI Password
• HTTP (Web) Password
Avaya Wireless AP-4/AP-5 User's Guide
Basic IP Parameters
Initialization
for more
2-23