Avaya AP-4 User Manual page 148

Filtering
Wireless Mask set to all zeros).
• To prevent all traffic from a specific wireless MAC address from
being forwarded to the wired network, configure only the Wireless
MAC address and Wireless Mask (leave the Wired MAC Address
and Wired Mask set to all zeros).
• To block traffic between a specific wired MAC address and a
specific wireless MAC address, configure all four parameters.
To create an entry, click Add and enter the appropriate MAC addresses
and Masks to setup a filter. The entry is enabled automatically when
saved. To edit an entry, click Edit. To disable or remove an entry, click
Edit and change the Status field from Enable to Disable or Delete.
4-64 Avaya Wireless AP-4/AP-5 User's Guide