Docking Station Desk Support Assy - GE Venue 50 Basic Service Manual

Replacement Procedures

Docking Station Desk Support Assy

Tools
Needed Manpower
Preparation
Removal Procedure
Table 8-2:
No.
1. Remove probe holders.
2. Push the trigger to the other side, then
use the other hand to take the Docking
module off track.
Mounting Procedure
8-8
• NA
• 1 person, 1 minute
• Cut off the AC Power input.
Removal Procedure for Docking Station Desk Support Assy
Steps
1. Install the new parts in the reversed order of removal.
Corresponding Graphic
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7