GE Venue 50 Basic Service Manual page 117

Mounting Procedure
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
1. Press the reset tippers to ensure that both hooks pop out.
a. Reset tippers
b. Hooks
2. Lift the Tray Assy to ensure the bottom of it and the base
chasis are at the same height.
3. Push the Tray Assy inward along the edge of the base
chasis. Ensure both edges of the Tray Assy are inside of the
guide slides of the base chasis.
System Configuration
3-45