GE Venue 50 Basic Service Manual page 187

Installation Procedure
NOTE:
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
The software upgrade SDHC card contains the software
Gateway. Please follow the steps to install the Gateway.
When installing Venue Gateway software to a computer, the
gateway installer will add some items to registry and also create
some shortcuts. If anti-virus software or some other software
pops up tips about these actions, please allow our installer to do
the changes, otherwise Venue Gateway software may not work
properly.
1. Insert the software upgrade SDHC card to the computer and
double click the corresponding drive.
2. Double click Setup.exe. The screen is displayed as below.
Press Next.
Figure 7-17. Installation Setup
Remote Service
7-21