GE Venue 50 Basic Service Manual page 115

Connect 3-probe Port to Docking Cart (continued)
NOTE:
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
8. Choose probes.
Power on the system and press Home to choose the
appropriate probe.
Figure 3-37. Choose Probes
The order of the probes shown on the screen is the same as
that of the probes connected to the 3-probe Port.
"No Probe" may display on the screen due to the following:
• No probe is connected to the relevant port.
• The probe may not be fully inserted into the slot.
Recheck the connection to insure proper connection.
• The probe is connected to the relevant port, but the
software option key for this probe has not been
activated. Please contact your local GE representative
and place an order for the additional software option.
See "Add new software option keys" in Basic User
Manual for more information
System Configuration
3-43