GE Venue 50 Basic Service Manual page 154

General Procedures and Functional Checks
SD Card Checks
Step
1. Insert SD card to the SD card socket on top
of the system.
2. Press Utility->Connectivity->Dataflow,
configure SD card as D1 or D2.
3. Press Dataflow Button with SD Card Icon to
store the patient information.
USB Memory Stick Checks
Step
1. Connect USB Memory Stick to the USB port
on top of the system or to Docking Station/
Cart.
2. Press Utility->Connectivity->Dataflow,
configure USB Memory Stick as D1 or D2.
3. Press Dataflow Button with USB Memory
Stick Icon to store the patient information.
B/W Printer Checks
Step
1. Connect Printer to Docking Station/Cart,
then plug power cord into wall outlet. Power
on the printer.
2. Press Utility->Connectivity->Dataflow,
configure Printer as D1 or D2.
3. Press Dataflow Button with Printer Icon to
print the images.
4-26
Table 4-6: SD Card Checks
Task to do
Table 4-7: USB Memory Stick Checks
Task to do
Table 4-8: B/W Printer Checks
Task to do
Expected Result(s)
The storage device status icon will display
the SD Card capacity on top of the screen.
The SD card icon will be shown on the
Dataflow Button.
The patient information is stored to the SD
Card.
Expected Result(s)
The storage device status icon will display
the USB Memory Stick capacity on top of
the screen.
The USB Memory Stick icon will be shown
on the Dataflow Button.
The patient information is stored to the USB
Memory Stick.
Expected Result(s)
The printer is powered on.
The Printer icon will be shown on the
Dataflow Button.
The images are printed.
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7