Table of Contents
Advertisement
4
Assembly
Assembly of the motor - with designs
without motor
4.1 Motor number
Motor number: "2"; "5"
User qualification: trained qualified personnel
Ä Chapter 2.2 'User qualification' on page 15
Compare the dimensions on the dimensional drawing with those of
the pump.
WARNING!
The following instructions relevant in areas at risk from
explosion apply in areas at risk from explosion.
1.
Select a suitable motor - the motor must correspond to the data for
one of the motors from the "Motor data" table - see "Technical data"
chapter.
2.
Have technical personnel fit the motor correctly on the flange.
Observe the coupling operating instructions!
With a claw coupling: Fix the claw on the motor shaft at the correct
height – see corresponding figure and table.
3.
Attach the documentation / operating instructions for the motor with
the documentation for the pump.
The motor number designates the motor, see
Fig. 11: Situation for the motor than can be mounted directly on the shaft
Assembly
B1271
21
Advertisement
Table of Contents
