Safety chapter
2.3 Warning symbols denoting different types of danger
Warning symbols denoting different types
of danger
Warning symbol
2.4 Intended use
2.5 Misuse
16
The following warning symbols are used in these operating instructions to
denote different types of danger:
Type of danger
Warning of a dangerous area.
Warning of hazardous electrical voltage.
Warning of hot surfaces.
Only use the pump to meter liquid, sediment-free feed chemicals.
n
Only start up the pump once it has been correctly installed and started
n
up in accordance with the technical data and specifications contained
in the operating instructions.
Observe the general limitations with regard to viscosity limits, chem‐
n
ical resistance and density - see also the ProMinent Resistance List
(in the Product Catalogue or at www.prominent.com)!
Only suitable pumps can be used in areas at risk of explosion.
n
The pump is not intended for operation in private areas.
n
Only allow appropriate personnel to operate the pump, see
n
2.2 'User qualification' on page 15 .
You have a responsibility to observe the information contained in the
n
operating instructions for the auxiliary equipment at the different
phases of its respective service life.
The pump is not intended for the metering of gaseous media and
n
solids.
The pump is not intended for the metering of explosive substances
n
and explosive mixtures.
The pump is not intended for unprotected use outdoors.
n
Ä Chapter