Ametek Thermox CG1000 User Manual page 18

Table of Contents

Advertisement

Output Range
Accuracy
Response
Repeatability
Leak Rate
Sample Flow
Max Inlet Temp
Inlet Pressure
Environment
Ambient Temp.:
Relative Humidity: 10% to 90%, non-condensing
Max Altitude:
IEC Installation
IEC Pollution
Enclosure
Lift-off NEMA 3R, weather resistant, stainless steel. Optional hinged NEMA 4X (IP56), explo-
sion-proof, purged, and floor mount versions available.
Power Requirements 115 VAC, 60 Hz, 150VA
Calibration Gas Requirements
Use calibration gases @ 150 sccm (limit is 50 to 200 sccm)
Zero Gas:
Span Gas:
System Compliance
EMC Compliance:
Safety Compliance:
2-2 | Thermox CG1000 Oxygen Analyzer
0.1ppm to 100% O
2
± 2% of reading or ± 0.05% oxygen absolute (.5 ppm O
ppm range), whichever is greater
< 5 secs. at 150 sccm over one decade
± 0.5% of reading or ± 0.01% oxygen absolute (.1 ppm O
ppm range), whichever is greater
3 x 10
-8
atmosphere cc/sec
50 to 200 sccm (150 sccm recommended)
160°F (71°C)
Limit: 20 psig
5°C to 40°C (41°F to 104°F);
-10°C to 40°C (14°F to 104°F) with optional built-in pump
2000 meters
Category II
Degree 2
From 0.1 to 10% O
, balance N
2
One decade above zero gas (10 times greater) recommended.
2004/108/EC
73/23/EEC
230 VAC, 50 Hz, 150 VA
2
absolute for
2
absolute for
2

Advertisement

Table of Contents
loading

Table of Contents