Appendix B Cli Provides Ascii-Based Interface - ATTO Technology FibreBridge 2370E Installation And Operation Manual

Appendix B
The command line interface (CLI) provides access to the ATTO FibreBridge Services through a set of ASCII
commands. CLI commands may be entered while in CLI mode.
FibreBridge Services provide configuration and
monitoring for the FibreBridge. The command line
interface (CLI) is a set of ASCII-based commands
which perform these tasks. CLI commands may be
entered while in CLI mode.
• CLI commands are context sensitive and
generally follow a standard format:
[Get|Set] Command [Parameter1|Parameter2]
followed by the return or enter key
• CLI commands are case insensitive: you may
type all upper or all lower case or a mixture.
Upper and lower case in this manual and the
help screen are for clarification only.
• Commands generally have three types of
operation: get, set and immediate.
• The get form returns the value of a parameter or
setting and is an informational command.
• Responses to get commands are followed by
Ready .
Exhibit 0.0-1 Symbols, typefaces and abbreviations used to indicate functions and elements of the
command line interface used in this manual.
Command conventions
Symbol
CLI provides ASCII-based Interface
Indicates
[ ] Required entry
< > Optional entry
| pick one of
... Ellipses, repetition of preceding item
\n end of line
- a range (6 – 9 = 6, 7, 8, 9)
fl Fibre Channel LUN (0 <= fl <= 255)
fp
Fibre Channel port number (1
sb SCSI bus number (1<= sb <= 2)
sl SCSI LUN ID (0 <= sl <= 7)
st SCSI target ID (0 <= st <= 15)
mp1 Ethernet port used to manage the FibreBridge
• The set form is an action that changes the value
of a parameter or configuration setting. It may
require a SaveConfiguration command and a
restart of the system before it is implemented.
The restart can be accomplished as part of the
SaveConfiguration command or by using a
separate FirmwareRestart command. A
number of set commands may be issued before
the SaveConfiguration command.
• Responses to set commands are either an error
message or Ready. *. The asterisk indicates
you must use a SaveConfiguration command
to finalize the set command.
SaveConfiguration asks if you want to restart
the system or not.
• Set commands which do not require a
SaveConfiguration command, defined as
Immediate commands, are executed.
• Responses to Immediate commands are either
an error message or data results followed by
Ready .
<=
fp <=1 or 2)
ii