___________________________________________________________
Various combinations of the breakers in the CLMD16 can be paralleled together to enable the
paralleled breakers to handle higher currents than a single breaker can handle. See Figure 20 for
channel grouping tab detail. See Paralleling Breakers on page 17 for additional details.
Groups 1 through 4
This parameter allows to configure which breakers operate in parallel.
Group 1
You may choose from the following:
• No Parallel Outputs – All four breakers operate independently.
• 1 & 2 – Breakers 1 and 2 operate in parallel, while breakers 11 and 12
operate independently.
Grouping Tab
Figure 20 - Grouping Configuration Tab Dialog Box
48