___________________________________________________________
Connecting J1-J3 Using Maretron Accessory Cable Assemblies
If you choose to use the premade cable assemblies, you will need to splice the ends of the cable
assemblies or connect them to a terminal block See Figure 6 for terminal block connection
depiction. Connectors J1 and J2 come with numbered leads, these numbers are indicators for the
ECB Output number and not the pin position. For a description of the cable assemblies available
from Maretron see Figure
5.
Figure 5 - Accessory Cable Assemblies
Figure 6 - Recommended Cable Assembly Connection Example
12