Model Version; Temperatures; Temp 12A Groups 1 To 3; Temp 25A Group - Maretron MPOWER CLMD16 User Manual

CLMD16 User's Manual

Model Version

This read-only field shows the internal version number of the CLMD16 application software.

Temperatures

Temp 12A Groups 1 to 3

These read-only fields (a and b) display the temperature measured by the two temperature sensors
in the CLMD16 located near the 12 Amp channels 1,2, and 3.

Temp 25A Group

These four read-only fields (a, b, c, and d) display the temperature measured by the four
temperature sensors in the CLMD16 located near the 25 Amp Group channels.

Temp MCU

These two read-only fields (a and b) display the temperature measured by the two temperature
sensors in the CLMD16 located near the system microcontroller.

Supply Voltage

Input Supply

This read-only field displays the voltage that is present on the DC Power Connection Stud with
respect to the DC Ground Connection Stud.

Over Voltage Fault

This read-only indicator is lit red if the voltage between the DC Power Connection Stud and the DC
Power Ground Stud is higher than the recommended operating range.

Under Voltage Fault

This read-only indicator is lit red if the voltage between the DC Power Connection Stud and the DC
Power Ground Stud is lower than the recommended operating range.

Execution Time Metrics

Max Time

This read-only field displays the longest loop time used by internal calculations.

Min Time

This read-only field displays the shortest loop time used by internal calculations.

Difference Time

This read-only field displays the average loop time used by internal calculations.
41
__