Discrete I/O Tab; Data Instance - Maretron MPOWER CLMD16 User Manual

CLMD16 User's Manual
__

Discrete I/O Tab

When a device transmitting the 127501 Binary Status Report message is part of the installation, it
can be configured to create an input signal for the CLMD16. Up to sixteen Discrete I/O signals can
be programmed.
See Figure 33 for Discrete I/O Tab detail.
Figure 33 - Discrete I/O Configuration Tab Dialog Box

Data Instance

This parameter allows you to configure the data instance of the 127501 Binary Status Report
message that will be used to create this discrete I/O signals. To assign a discrete input from this
device to this discrete I/O signal, enter the instance value assign to this device (the value of the
"Instance" field on the "General" tab).
67