Access Port And Uplink Port Leds On An Acx5000 Router - Juniper ACX5048 Hardware Manual

Table 9: Management Port LEDs on an ACX5000 Router
LED Color
Link/Activity Unlit
Green
Status Unlit
Green
Amber
SEE ALSO
Connecting an ACX5000 Router to a Network for Out-of-Band Management | 121

Access Port and Uplink Port LEDs on an ACX5000 Router

The Link/Activity and Status LED configuration for ACX5000 routers use bi-colored LEDs. The link LED
indicates link activity or a fault. The status LED indicates transceiver presence. See
to locate the position and type of LED for your ACX5000 model.
State
Off
On steadily
Blinking or flickering
Off
On steadily
On steadily
Description
No link is established, there is a fault, or the link is
down.
A link is established, but there is no link activity.
A link is established, and there is link activity.
Either the port speed is 10 M or the link is down.
The port speed is 1000 M.
The port speed is 100 M.
Table 10 on page 58
57