Usb Port Specifications For An Acx5000 Router - Juniper ACX5048 Hardware Manual

Table 34: Console Port Connector Pinouts for an ACX5000 Router (continued)
Pin
5
6
7
8
SEE ALSO
Connecting an ACX5000 Router to a Management Console | 120

USB Port Specifications for an ACX5000 Router

The following Juniper Networks USB flash drives have been tested and are officially supported for the
USB port in the ACX5000 routers:
RE-USB-1G-S—1-gigabyte (GB) USB flash drive
RE-USB-2G-S—2-GB USB flash drive
RE-USB-4G-S—4-GB USB flash drive
CAUTION:
has not been tested by Juniper Networks. The use of any unsupported USB memory
product could expose your device to unpredictable behavior. Juniper Networks
Technical Assistance Center (JTAC) can provide only limited support for issues related
to unsupported hardware. We strongly recommend that you use only supported USB
flash drives.
CAUTION:
ACX5000 routers. Failure to do so could expose your device to unpredictable behavior.
Signal
Signal Ground
RxD Input
DCD Input
CTS Input
Any USB memory product not listed as supported for the ACX5000 routers
Remove the USB flash drive before upgrading Junos OS or rebooting a
Description
Signal ground
Receive data
Data carrier detect
Clear to send
98