Connecting The Acx5048 And Acx5096 To Power - Juniper ACX5048 Hardware Manual

4. Attach the mounting bracket to the ACX5096 using eight mounting screws (and cage nuts and washers
if your rack requires them).
5. Repeat this procedure for the mounting bracket on the opposite side of the router. Tighten all screws.
6. Use two people to attach the brackets to the posts.
a. Have one person grasp both sides of the router and lift it into place.
b. Ensure the router is level.
c. Have the second person use the four mounting screws (and cage nuts and washers if your rack
requires them) to screw the mounting bracket to the rack.
7. Attach a ground cable to earth ground and then attach it to the chassis grounding points, as described
in "Connecting the ACX5000 Router to Earth Ground" on page
SEE ALSO
Rack-Mounting and Cabinet-Mounting Warnings | 170

Connecting the ACX5048 and ACX5096 to Power

IN THIS SECTION
Connecting the ACX5000 Router to Earth Ground | 110
Connecting AC Power to an ACX5000 Router | 112
Connecting DC Power to an ACX5000 Router | 114
110.
109