Advertisement
Table 7: Chassis Status LEDs on an OCX1100-48SX Switch
LED Label
Color
Blue
LOCATOR
(Status)
Green
STAT
Amber
(Power)
Green
PWR
Amber
Green
FAN
Amber
Related
Documentation
Management Port LEDs and Console Port LEDs on OCX1100 Switches
Copyright © 2017, Juniper Networks, Inc.
Table 7 on page 13
describes the chassis status LEDs on an OCX1100-48SX switch, their
colors and states, and the status they indicate. You can view the colors of the four LEDs
directly on the chassis or remotely through the CLI by issuing the operational mode
command
show chassis led
State and Description
Blinking—Locator function is enabled.
Off—Locator function is disabled.
Locator is used to show where the device is.
On steadily—POST (power-on self-test) passed. Normal operation.
Blinking—POST in progress.
Off—The switch is powered off or is halted.
Blinking—POST, power supply, or fan module failed. System too hot.
On steadily—Power on.
Off—Power off. No power cable attached.
Blinking—One of the power supply failed.
On steadily—Normal operation.
Off—Not receiving power.
Blinking—Fan failure.
All four LEDs can be lit simultaneously.
OCX1100 Switches Hardware Overview on page 3
The management port—labeled
the front panel of an OCX1100 switch have two LEDs each that indicate link and activity
and status of the ports. The status LED on the management port and the link and activity
LED on the console port are inactive LEDs.
LEDs on the management port and the console port of an OCX1100-48SX switch.
Chapter 2: Chassis Components and Descriptions
.
— and the console port—labeled
MGMT
Figure 6 on page 14
— on
CONSOLE
shows the location of
13
Advertisement
Chapters
