Table 14: Management Port LEDs on a QFX5100 Switch
LED
Color
Link/Activity
Unlit
Green
Status
Unlit
Green
Amber
Related
Documentation
Access Port and Uplink Port LEDs on a QFX5100 Device
Copyright © 2016, Juniper Networks, Inc.
State
Off
On steadily
Blinking or flickering
Off
On steadily
On steadily
Management Panel of a QFX5100 Device on page 19
Connecting a QFX5100 Device to a Network for Out-of-Band Management on page 180
The Link/Activity and Status LED configuration for QFX5100 switches use bi-colored
LEDs. The link LED indicates link activity or a fault. The status LED indicates transceiver
presence. See
Table 15 on page 58
model.
Chapter 5: Viewing System Information
Description
No link is established, there is a fault, or the link is down.
A link is established, but there is no link activity.
A link is established, and there is link activity.
Either the port speed is 10 M or the link is down.
The port speed is 1000 M.
The port speed is 100 M.
to locate the position and type of LED for your QFX5100
57