Cabinet Requirements For An Acx5000 Router - Juniper ACX5048 Hardware Manual

The grounding cable that you provide for a ACX5000 router must be 14 AWG (2 mm²), minimum 60° C
wire, or as permitted by the local code.

Cabinet Requirements for an ACX5000 Router

You can mount an ACX5000 router in an enclosure or cabinet that contains a four-post 19-in. open rack
as defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published
by the Electronics Industry Association.
Cabinet requirements consist of:
Cabinet size and clearance
Cabinet airflow requirements
Table 27 on page 85 provides the cabinet requirements and specifications for an ACX5000 router.
Table 27: Cabinet Requirements for an ACX5000 Router
Cabinet Requirement
Cabinet size and clearance
Cabinet airflow requirements
Guidelines
The minimum cabinet size for accommodating a ACX5000 router is 36 in.
(91.4 cm) deep. Large cabinets improve airflow and reduce the chance of
overheating.
When you mount the router in a cabinet, ensure that ventilation through the
cabinet is sufficient to prevent overheating.
Ensure that the cool air supply you provide through the cabinet adequately
dissipates the thermal output of the router (or routers).
Ensure that the cabinet allows the chassis hot exhaust air to exit the cabinet
without recirculating into the router. An open cabinet (without a top or
doors) that employs hot air exhaust extraction from the top allows the best
airflow through the chassis. If the cabinet contains a top or doors,
perforations in these elements assist with removing the hot air exhaust.
The ACX5000 router fans exhaust hot air either through the vents on the
port panel or through the fans and power supplies. Install the router in the
cabinet in a way that maximizes the open space on the FRU side of the
chassis. This maximizes the clearance for critical airflow.
Route and dress all cables to minimize the blockage of airflow to and from
the chassis.
Ensure that the spacing of rails and adjacent cabinets allows for the proper
clearance around the router and cabinet.
85