Juniper ACX5048 Hardware Manual page 111

1. Secure the provided protective earthing terminal bracket through the ACX5000 router mounting bracket
to the chassis with the nut provided. The posts on the protective earthing terminal bracket should point
to the left. See Figure 35 on page 111
Figure 35: Connecting a Grounding Cable to a 1 U ACX5048
Figure 36: Connecting a Grounding Cable to the 2 U ACX5096
2. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the router
is mounted.
3. Place the grounding lug attached to the grounding cable over the protective earthing terminal on the
protective earthing terminal bracket.
4. Secure the grounding lug to the protective earthing terminal with two nuts.
5. Dress the grounding cable and ensure that it does not touch or block access to other device components
and that it does not drape where people could trip over it.
SEE ALSO
General Safety Guidelines and Warnings | 158
and Figure 36 on page 111.
4
2
0
5
3
1
52
50
4 8
53
51
49
10
8
6
11
9
7
58
56
54
59
57
55
111