Table of Contents
Advertisement
GC2e Wireless Security System | Installation and Programming Guide
NOTE: The other buttons let you restore the default Control
Panel settings and provide access to a variety of system tests.
Figure 27
Installer Toolbox Screen
After tapping the System Configuration button, the first
programming question appears. To learn more, see System
Configuration Screens .
System Configuration Screens
Use the System Configuration screens to program sensors into
the system . Installers can access the System Configuration
screens as described in Accessing the System Configuration for
System and Sensor Programming .
The System Configuration screens present installers with
a sequential list of programming questions. For a list of all
available programming questions, see
Table on page
29 .
Figure 28
Q1: Select RF Sensor # (01-48, 63-74).
TIP: To simplify programming, questions are arranged so that
commonly used values appear early in the question sequence.
Copyright © 2018 Nortek Security & Control
Toolbox and Installer Toolbox
"Programming Question
24
Advertisement
Table of Contents
Need help?
Do you have a question about the 2GIG e Series and is the answer not in the manual?