Programming The Resistance Of The Thermistor (Resi) - THORLABS ITC8 Series Operation Manual

52 Commands
_________________________________________________________________________________

3.2.17 Programming the resistance of the thermistor (RESI)

Programming:
":RESI:SET <NR3>"
":RESI:MEAS <NR1>"
Reading:
":RESI:SET?"
":RESI:ACT?"
":RESI:MIN?"
":RESI:MAX?"
":RESI:MIN_W?"
":RESI:MAX_W?"
":RESI:MIN_R?"
":RESI:MAX_R?"
":RESI:MEAS?"
______________________________________________________________________________________________________
Programs the resistance of the temperature sensor
(thermistor)
RESI as measurement value for "ELCH" on string
position <NR1> (1....8)
Reads the set resistance of the sensor (thermistor,)
[:RESI:SET <NR3><LF>]
Reads the actual resistance of the sensor
[:RESI:ACT <NR3><LF>]
Reads the minimum allowed set resistance of the
sensor
[:RESI:MIN <NR3><LF>]
Reads the maximum allowed set resistance of the
sensor
[:RESI:MAX <NR3><LF>]
Reads R - DAC = 0000
[:RESI:MIN_W <NR3><LF>]
Reads R - DAC = FFFF
[:RESI:MAX_W <NR3><LF>]
Reads R - ADC = 0000
[:RESI:MIN_R <NR3><LF>]
Reads R - ADC = FFFF
[:RESI:MAX_R <NR3><LF>]
Reads string position of R (1....8) for "ELCH" as
measurement value
[:RESI:MEAS <NR1><LF>]
© 2010 Thorlabs