Software Limits I Max; Te Lim - THORLABS ITC8 Series Operation Manual

14 Presettings
_________________________________________________________________________________
1.5.2 Software limits I
The software limits I
module or via the IEEE 488 interface.
The software limits I
hardware limit.
(Refer to chapter 2.2, "Functions in the channel menu" starting on page 29)
The lower of the two limits I
______________________________________________________________________________________________________
and I
MAX

TE LIM

and I are set and changed in the channel menu of the
MAX TE LIM
CH2 U
LD
CC off Imax= 200.0mA
TH off I
LIM
CH2 I
TE
CC off U
TE
TH off I
TE LIM
and I have exactly the same protective function as the
MAX TE LIM
MAX
Software limit I
MAX
= 0.0000 V
= 188.22mA
CHANGE
=+0.0000 A
=+0.0000 V
=0.800 A
CHANGE
Software limit I
TE LIM
NOTE
or I will limit the laser diode current.
LIM
© 2010 Thorlabs