Functions In The Channel Menu; Display - THORLABS ITC8 Series Operation Manual

_________________________________________________________________________________
To change the set temperature use the softkey
Press to end the procedure.
If the TEC current is switched ON, the actual temperature is displayed. In
this case the set temperature can still be changed but is not displayed.

2.2 Functions in the channel menu

The channel menu is reached from the main menu by pressing the key
Hit again or

2.2.1 Display

In the channel menu all parameters of the selected module are shown:
channel no.
operating mode, laser on/off
_____________________________________________________________________________________________________
© 2010 Thorlabs
CH1 122.3mA +30.0°C
CH2
CH3
TUNE: I
NOTE
to return to the main menu.
cursor operating parameters
CH1 I
LD
CC off P
LD
TH off T
A
status field, TEC on/off
Functions in the channel menu
(T )
.
S
T
LD S
= 44.000mA
=0.70000mW
= + 22.60°C
CHANGE
29
.